January 04, 2022, 09:48:41 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Calls Dropped - Obi110  (Read 5102 times)
Tobias_Tromm
Newbie
*
Posts: 6


« on: February 16, 2015, 04:54:40 pm »

Hi.

I am having some problem with Obi110 dropping calls without reason.

This problem occur randomly and i don't know why.

Can someone help?

- I already force it to use 100Mbit Full duplex: http://www.obihai.com/support/troubleshooting/sg/drop

- My device is running latest firmware: 1.3.0 (Build: 2872).

- The uptime is OK, the problem is not caused by reboot.

- DetectCPC: already disable it to test.

- SilenceTimeThreshold change to 300.

Sometimes my calls drop after some seconds and sometimes after some minutes.

I am using Obi to dial out under PSTN line on local network, so this is not a router issue I guess since I am not using the Internet.
Logged
ianobi
Hero Member & Beta Tester
*****
Posts: 1831


« Reply #1 on: February 17, 2015, 12:53:21 am »

If it is only affecting PSTN calls, then I would disable all of the following:

DetectCPC
DetectPolarityReversal
DetectFarEndLongSilence
DetectDisconnectTone

If both caller and callee hang up after the call, then the call should still disconnect.

If the above solves the problem, then enable each parameter that you think you may need. Personally, I would never enable DetectPolarityReversal or DetectFarEndLongSilence, but this does depend on what country you live in and local PSTN line signals.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Advertisement
Advertisement